LED Wall Washer
LED Light Fixture with Swivel Base

The NP Lighting swivel joint LED fixtures are especially designed for exterior use. An ingress protection rating of 66 makes sure that both the LEDs as well as the circuitry are optimally protected from the elements. The elegant aluminum housing is available in both anodized silver and in black. Moveable swivels at the underside of the fixtures allow you to easily secure the light fixture to almost any surface while providing a pivot angle of 160˚. These light fixtures are available in 25cm, 50cm, 75cm, and 1 meter length.
The fixtures can be ordered with either a standard 120˚ beam angle or a with a special lens to achieve a beam angle of 80˚.

Download spec sheet:
LED Wall Washers

show
System Type:
Rigid Linear Light Fixture with swivel
show
Fixture Type
Anodized Aluminum (Silver/Black)
show
Ingress Protection Rating:
IP65
show
Beam Angle:
120˚ or 80˚
show
Circuit Type:
24VDC with Current Controlls
show
Rated Life (L70):
30000 hours @ 80˚F ambient Temperature
show
Control Options:
Dimm and Toggle: DMX 512
show
Attachment Options:
Swivel joints (see picture)
Stacks Image 723
NP Lighting Bridges
show

FIXTURE NAME

FIXTURE DIMENSIONS

AVAILABLE COLORS

POWER CONSUMPTION

LUMEN OUTPUT (WHITE)

show

LED-LSW-IP-HI-250-C

250mm x 25mm x 30.5mm

White 27/30/35/65; Red; Green; Blue; RGB

4.5W/fixture

495 lumen

show

LED-LSW-IP-HI-500-C

500mm x 25mm x 30.5mm

White 27/30/35/65; Red; Green; Blue; RGB

9W/fixture

990 lumen

show

LED-LSW-IP-HI-750-C

750mm x 25mm x 30.5mm

White 27/30/35/65; Red; Green; Blue; RGB

13.5W/fixture

1485 lumen

show
LED-LSW-IP-HI-1000-C

1000mm x 25mm x 30.5mm

White 27/30/35/65; Red; Green; Blue; RGB

18W/fixture

1980 lumen